Features and Benefits1. The water-sealed structure is adopted, and the sealing performance betw
WhatsApp : +86 13816217984
Email : info@qinsun-lab.com
1. The water-sealed structure is adopted, and the sealing performance between the chamber cover and the chamber is excellent, effectively preventing the salt spray from spilling.
2. Salt spray corrosion test chamber can accurately control temperature,salt spray concentration, and is monitored and controlled by the microprocessor control system.
3. Tower spray method, nozzle design and distribution can make the salt spray evenly sprayed on the test sample, simulate the real marine environment or other corrosive environment.
4.The whole chamber body material adopts glass fiber reinforced plastics and is one-time forming.Strong corrosion resistance,reinforced design, long service life and high temperature resistance.
①Workroom |
Standard:round rod and V-shaped groove design, test pieces can be freely placed and adjusted angles.
|
②Spray tower |
|
③Heater strip | Heat the air in the test chamber to meet the temperature conditions required for the test. Fast heating speed and uniform temperature. |
④Saturated barrel | For humidifying and preheating the air entering the spray system, so that the air reaches a saturated state to keep the temperature and humidity of the salt spray stable. |
⑤Controller | The user can set the test temperature, humidity, spray time and other parameters through the control system, and monitor the data during the test in real time. |
⑥Salt solution tank | Built-in 30 liter salt solution tank with a brine mixing system to keep the brine even. S-010.S-016.S-020 equipped with an external salt tank. |
⑦Air supply(Option) | The compressed air produced by the air compressor is filtered, reduced pressure, and purified before entering the spray system. The role of the compressed air is to blow salt water out of the nozzle, forming a salt spray. |
Minta | STD S-150 | STD S-250 | STD S-750 | STD S-010 |
Internal dimensions (mm) | 590*470*400 | 1000*640*500 | 1100*750*500 | 1000*1300*600 |
Overall dimensions (mm) | 1460*760*1140 | 1850*960*1350 | 1950*1030*1350 | 2000×1300×1600 |
Interior Volume (L) | 110 | 320 | 410 | 780 |
Hőmérséklet-tartomány | Ambient ～ +60 ℃ | |||
Temperature Fluctuation | ± 0.5 ℃ | |||
Temperature Deviation | ± 2.0 ℃ | |||
Humidity Range | 95% ~ 98% RH | |||
Salt Fog Deposition | 1～2ml / 80cm2 · h | |||
Spray Type | Continuous / Periodic | |||
Salt Fog Collected | Fog collector and fog measure cylinder | |||
Air Preheating | Saturated air barrel | |||
Spraying System | Atomizer tower and Spray nozzles | |||
Controller | PID controller | |||
Safety Device | Humidifier Dry-combustion Protection; Over-temperature Protection; Over-current Protection; Water Shortage Protection; Earth leakage Protection | |||
Material | Glass fiber reinforced plastics | |||
Szabványos beállítások | 6 round bars and 5 V-shaped grooves | |||
Felelősségi nyilatkozat: A fenti tartalom kizárólag az iparági belső személyek közötti hivatkozásra és kommunikációra szolgál, és nem garantálja pontosságát vagy teljességét. A vonatkozó törvények és előírások, valamint a weboldal előírásai szerint a kapcsolódó cikkeket vásárló egységeknek vagy egyéneknek érvényes képesítést és képesítési feltételeket kell megszerezniük.
Vállalati telefon
+86-21-6420 0566
munkaidő
Hétfőtől péntekig
Mobiltelefon:
13816217984
E-mail:
info@qinsun-lab.com
