I. Product Overview
The Flatbed Ironing Tester is a precision instrument designed to evaluate fabric performance under simulated ironing conditions. It measures heat resistance, crease recovery, and shrinkage resistance, providing critical data for textile quality control and R&D applications.
- Type: Bench-top thermal testing equipment
- Temperature Range: Ambient +20°C to 300°C
- Pressure Control: 0.5-5 kPa adjustable (simulates iron weights)
- Test Area: 300×300mm heated flatbed
- Applications: Apparel, home textiles, industrial fabrics
II. Technical Specifications
| Paraméter |
Specifications |
| Heating Rate |
10°C/min (programmable) |
| Cooling System |
Forced air cooling (30°C recovery in 5min) |
| Tápegység |
220V/50Hz, 1.5kW |
| Méretek |
600×500×1200mm (W×D×H) |
| Súly |
45kg |
| Temperature Uniformity |
±2°C across test area |
III. Key Features
- Multi-Test Modes:
- Crease Recovery Test: Measures angle retention after 5min pressing
- Shrinkage Test: Evaluates dimensional stability at 180°C
- Heat Setting Test: Simulates industrial ironing conditions
- Digital Control System:
- 7-inch touchscreen interface
- Programmable 100-step test sequences
- Real-time data logging (CSV export)
- Safety Features:
- Overheat protection (auto-shutdown at 310°C)
- Interlock door switch
- Grounding indicator
IV. Compliance Standards
- ISO 3758 (Textile care labeling)
- ASTM D1683 (Fabric wrinkle recovery)
- AATCC 117 (Flammability resistance)
- GB/T 3917.3 (Chinese textile shrinkage standard)
V. Applications
- Quality Control: Batch testing of finished fabrics
- R&D: Developing wrinkle-resistant treatments
- Textile Education: Training on heat treatment effects
- Forensic Analysis: Evaluating garment damage causes
Standard Test Procedure:
- Sample Preparation: Cut 100×100mm specimens
- Positioning: Center sample on heated plate
- Parameter Setup: Select test mode (e.g., 200°C/3kPa/5min)
- Data Acquisition: Record recovery angle/shrinkage rate
- Cleaning: Autoclave decontamination cycle
Safety Precautions:
- Wear heat-resistant gloves during operation
- Use heat-resistant mats under equipment
- Maintain 30cm clearance from flammable materials
Felelősségi nyilatkozat: A fenti tartalom kizárólag az iparági belső személyek közötti hivatkozásra és kommunikációra szolgál, és nem garantálja pontosságát vagy teljességét. A vonatkozó törvények és előírások, valamint a weboldal előírásai szerint a kapcsolódó cikkeket vásárló egységeknek vagy egyéneknek érvényes képesítést és képesítési feltételeket kell megszerezniük.
