100-V2 steam generator tester

Megfelel a szabványnak:

The 100-V2 steam generator meets the requirements of Ford FLTM BI 107-05, GMW15919 and FCA LP-463PB-64-01 thermal shock test specifications.

Thermal shock test requirements:

Test Innovation Equipment is one of the only approved automotive thermal shock （steam injection） test manufacturers.

If you are new to thermal shock testing, you may find that an overview of thermal shock testing helps you become more familiar with the various OEM thermal shock testing methods.

Product Advantages:

Specifically Designed for Automotive Thermal Shock: Built to provide steam with the precise parameters required for common automotive thermal shock tests involving steam injection.

Meets Major OEM Standards: Complies with the specifications of leading automotive manufacturers like Ford, General Motors (GM), and FCA (Fiat Chrysler Automobiles - now part of Stellantis).

Produces Consistent Steam: Capable of generating consistent steam output, crucial for repeatable test results.

Controllable Steam Parameters: Provides controlled water flow rate and steam dynamic pressure as specified by the test standards.

Part of Approved System: Manufactured by a supplier recognized for automotive thermal shock test equipment, suggesting integration within systems designed to meet industry requirements.

Adjustable Burner: Features an adjustable gas/electric burner for flexible control over the steam generation process.

Product Features:

Dedicated steam generator unit (Model 100-V2).

Capability to produce consistent steam output.

Adjustable gas/electric burner for heating and steam generation.

Controlled water flow rate output (2.7 ± 0.1 L/min).

Controlled nozzle steam dynamic pressure output (37.9 ± 1.9 kPa).

Designed to be used in conjunction with high temperature/high pressure steam hoses and a tubular nozzle meeting specific dimensions and material requirements.

Supplied by Testing Innovations, Inc.

Steam equipment:

Steam generator: Capable of producing consistent steam with an adjustable gas/electric burner. The water flow rate is 2.7 +/ -0.1 L/min, and the nozzle steam dynamic pressure is 37.9 +/ -1.9 kPa.

Hose: Can withstand high temperature/high pressure steam

Tubular nozzle: Inner diameter 12.5 +/- 0.3mm, length not less than 100mm, made of non-corrosive material

Supplier: Testing Innovations, Inc.

25170 Johnley Road

Madison Heights, Michigan 48071

（248） 515-5855

Model: 100-V2

Dynamic Head clamp （DHF） - Dynamic head pressure

See Figure 1-3. Must be able to measure the discharge dynamic head pressure of 37.9±1.9 kPa. Measuring 25 mm from the nozzle, using a 4.7 mm bore tube.

Supplier: Testing Innovations, Inc.

25170 Johnley Road

Madison Heights, Michigan 48071

（248） 515-5855

Model: DHF-1