Infusion Apparatus Leakage Positive Pressure Tester

M102 Infusion apparatus leakage positive pressure tester, It is suitable for the measurement of the airtight of injector for medical purpose, and it can accurately measure whether the sealing performance of the injection syringe meets the specified requirements.

1.Injection syringe is widely used in medicine, and their quality is closely related to our health and life safety. The injection syringe airtight positive pressure tester is designed with new technology.

2. The air pump output range is adjustable from 0-100KPa with an error of no more than ±2.5% of the reading.

Standards compliant：

GB 8368-2005: Chinese National Standard "Disposable Infusion Sets for Single Use — Gravity Infusion Type", which mandates performance requirements (including airtightness) for medical infusion devices, directly guiding the tester’s validation of syringe/seal integrity.

Major Features

Touch-tone control panel

The tester adopts touch-tone and LED digital display meter, and the test pressure can be set arbitrarily, with wide application range, stable performance, and long service life.

Test time can be set arbitrarily

The tester has a timing module, and the test time can be set arbitrarily to meet different test requirements.

Air Leaknge Teater far Seoitive Pressre

Flexible and compact design The flexible and compact design makes this tester easy to assemble, which can be installed to test from the lab to the production line at anytime, anywhere.

Field Application

M102 Infusion apparatus leakage positive pressure tester, Itis suitable for the measurement of positive pressure airtight of medical infusion apparatus, blood transfusion devices, infusion needles, anesthesia bag filters, pipelines, conduits, quick joints, and etc. It can accurately measure whether the sealing performance of injection syringe meets the specified requirements.

It is applicable to the performance verification of new products, quality control of the production department, and the of material properties for the third-party testing organization, the product performance verification laboratory, and the quality and technical supervisiondepartment, etc.

Műszaki paraméterek

Használat:

put the instrument horizontally on the test platform ;

the Vessel to be tested will be installed on the outfall Connector;

Plug the power plug into the distribution board, and the power socket on the distribution board must be grounded reliably.

Operating instructions

1. Turn on the power and turn on the power.

2. Click "next" and enter "main menu". There are four options of "setting", "test", "measurement" and "air release".

3. Click "setting", set the "stress" can be performed at this time, set the "time", "" date and time setting, just enter the corresponding project selection and vessels of the specifications of the corresponding parameters can be confirmed to be tested.

4. Click "set pressure" and click the corresponding number of test pressure to "confirm". (unit: Kpa. "Confirm" and return to set parameters.

5. Click "set time", and then click the corresponding number for the test to "confirm". Unit: seconds. "Confirm" and return to set parameters.

6. Click "date & time". After clicking "date", enter the date of the test day to be confirmed. (the format is: year/month/day, change of time is similar to change of date. (" confirm "and return to the main menu.)

7. After clicking "measurement", first connect the standard air source, and then measure whether the internal data is standard. This step is not required for normal operation. This option is used for metering authentication.

8. Click "release", i.e. the internal test data pressure value is clear.

9. See the "main menu" shown in the content and the vessels being measured parameters are set by matching, can click on the "test", after the test according to test results, a visual check to see if the set with the test values of qualified, click on the "qualified" or "unqualified" after the "print". "Return" returns to the main menu.